The average price of a bicycle in the US in 2014 was $673. Needless to say that value has no risen. The reasons behind this are not actually connected with the manufacturer’s getting greedy. Cycling is becoming an increasingly popular method of commuting to work.
It is also a hobby for many and an excellent way to stay in shape. The acknowledgment that obesity is a rising problem has led to a surge in the number of people getting out on their bikes.
This is good news! Cycling is fun as well as a great way to stay in shape.
But, when you’re spending a considerable sum of money on a bike you’ll want to look after it. This doesn’t just mean learning to do the regular maintenance. It’s important to consider where you’ll store your bike.
Ideally it will be somewhere it cannot be accidentally knocked over or scratched. In fact the safest method of storing your bicycle is actually to get a bike stand. You can choose a bike stand that will allow you to secure your bike inside a garage, shed or even inside your home. That’s the beauty of a bike stand; you can put it almost anywhere and know that your bike is safe and protected; from criminal types and other members of your family!
Of course, once you realize you need a bike stand you’ll have to start deciding which bike stand is right for you. There’s a helpful guide later in this article to assist you in considering all the factors before you make your final choice.
Types Of Bike Stand
Before you can look at the best bike stand of 2019 it’s important to understand that there are two main types of stand; the stationary bike stand and the bike repair stand.
The Stationary Bike Stand
You could also describe this as a storage stand. The main purpose of this type of stand is to give you somewhere to keep your bike. If space is limited then a stationary bike stand can allow you to stack your bikes; preventing them from taking up too much space.
Alternatively it is simply a way to keep your bike in one spot and ensure that you know where it is and can give it adequate protection round it. After all, when you send a lot of money on a bike you want to take care of it.
The stationary bike stand can have an attractive design; this allows you to incorporate it into your interior decorating patterns and keep your bike inside your home. Of course, there are stationary bike racks which are much more functional and are designed to be kept in a garage or similar.
The Bike Repair Stand
In contrast the bike repair stand is always functional. Its purpose is to give you a place where you can raise your bike into the air and work on it. This could be for general maintenance or for a bigger job.
The bike repair stand eliminates the stress of trying to hold your bike in one position while you make adjustments. It’s not just easier to hold the bike it is also less strenuous on your back as the bike can be brought to your level; you don’t need to spend hours bent over it.
It’s worth noting that there are actually two types of bike repair stand:
This type of bike repair stand is designed to hold any part of your frame although it’s usually the top bar or the seat post. You can usually lift your bike into this type of stand and have it clamped in moments; the process is very simple.
However, very light bikes should not be camped into this type of bike stand; you’re likely to damage the bike and the clamp will probably not secure itself properly. For most other bikes this is the preferred style of bike repair stand.
Axle or Bottom Bracket Clamp
The alternative is a space-saving option that clamps to the axle of your bike. However, in most cases you’ll need to remove the wheel to get your bike onto this stand; it clamps through the wheel axle.
On the plus side, this type of stand can be spun which will allow you to access all parts of your bike without having to move. Of course, if you have a complicated brake system then you may find this style of stand frustrating.
Don’t forget that when choosing a stand you’ll need to consider whether it’s portable or not and whether this is important to you!
The 10 Best Bike Stands:
Bikehand first started trading in 1988. They have specialized in providing bike tools; including the best bike stands for every need. In fact, they are known for their innovation and even have a large number of product-related patents.
This stylish looking bike stand can be used as a bike repair stand or a stationary bike stand. It weighs just 1.7 pounds and can be easily moved to wherever you need it. In fact, there is a quick release handle which allows you to fold the legs up and the head; leaving you with a stand that can be carried anywhere with you.
You can even take it to work and keep your bike in your office!
Alternatively, this makes it simple to store the bike stand when you’re not using it. Of course, although it is designed as a bike repair stand it can also be used as a stationary bike stand to store your bike.
This bike repair stand is designed to clamp onto your seat post; effectively lifting your bike off the ground and giving you complete access to all of the components. Clamping on the seat posts means that the Bikehand stand can even be used on carbon bikes without risk of damaging them.
The Bikehand mechanic repair stand has just two legs which come out as a ‘V’ from the main post. This is actually very sturdy and also allows you to have the stand against a wall; if space is limited.
Once on the stand, you’ll find it is easy to rotate your crank; including the pedals. The clamp itself can be rotated through 360°; this allows you to find the perfect angle for your bike depending on which part you need to look at. You’ll also find that the height of the Bikehand stand can be easily adjusted to accommodate all frame sizes and ensure it remains easy to work on your bike.
As an added bonus there is a magnetic tool plate attached to the main pole. This can be slid up and down according to your needs and gives you the perfect place to keep your tools.
The Bikehand mechanic bike stand is made from aluminum alloy; this is why it is so light and yet still strong.
Useful facts about this bike stand include that it can accommodate bikes up to 55 pounds (25kg). The height adjustment moves the stand between 39 inches and 59 inches. It also comes with a one year warranty from its Taiwanese manufacturer; giving you some peace of mind.
This is a budget offering but also a well designed and built bike stand. It can be stored in your garage and used when needed or you can keep it in your apartment and store your bike out of the way. You’ll be surprised by how little space it takes up.
It is worth noting that the collar cuffs inside the clamp are designed to grip your bike and protect it from harm. However, these do not fully close which could be a problem if you have a particularly small bike frame.
It is also essential that you check the pack as soon as you receive it to ensure all parts are present and none are broken; this will make the process of getting a replacement much simpler.
There is little doubt that this bike stand is designed as a stationary bike stand. While it is possible that you could work on your bike and use this as a bike repair stand; the reality is that you won’t be able to turn the crank with the pedals attached and the stand isn’t really designed with this in mind.
Racor is one of the best-known suppliers of bike stands; particularly stands designed for storing your bikes safely. They offer a wide variety of systems but this Racor Pro PLB-2R is a great addition inside your home or garage. It simply stands on the floor and can be right next to the wall to improve stability and ensure you minimize the space your bikes take up.
You won’t be surprised to realize that this bike stand is designed to take 2 bikes. They are arranged above each other; again minimizing the space they take up. There are two arms for each bike; one on each side of the post. These can be adjusted up and down to create the perfect position for supporting your bikes.
Impressively the post and the bike support arms are made from heavy-duty steel which has an epoxy finish. You’ll also appreciate the rubber guards on the base which protect your floor and prevent the Racor stand from sliding.
The Racor PLB-2R is designed to hold 100 pounds; that’s 50pounds per bike which should cover most of the bikes on the market. The stand itself weighs 20 pounds and can be put together in a matter of minutes without any tools. If necessary you could take it apart and move it with you to a friend’s house or simply across your room.
The straight main post is designed to stand against the wall. It comes out at a diagonal to the floor and then has a curved base leading back into your wall. This design ensures the stand will remain stable even when you have 2 bikes on it. However, if you have any concerns the bike stand does come with a securing strap that you can fasten to the wall; ensuring there are no issues.
Its dimensions are 79 inches x 26 inches x19 inches and it’s only available in black. But it does come with a lifetime warranty although this is not transferable to the second owner; should you ever decide to sell. It is worth noting that the arms to support your bike are adjustable and have solid clips at the end of them. You simply set them at the right height and lift your frame into the clips. That’s it!
The clips do rotate allowing you to create the right height and angle for a woman’s bike as well as a man’s. You should also be aware that there have been a few issues with the ease of putting the Racor bike stand together. It is recommended that you contact their customer service department if you have any issues like this. Existing consumers show that they offer a good level of service.
The second offering from Racor on this best bike stand list is most definitely a stationary bike stand. While you could use it to work on your bike it won’t give any of the advantages of a bike repair stand. Your bike will still be on the floor and it will be impossible to turn the pedals while it is in the rack.
However, the Racor PBS-2R is a great bike stand for storing your bikes in a garage, shed or even in your home. It can also be used to help encourage your children to park their bikes properly.
The stand is made from tubular steel which has been given an epoxy finish. This helps it to look good and protects the steel from moisture and rust. It is worth noting that you will need to put the bike stand together when you first get it.
You can purchase additional Racor bike stands if you wish, each one of these is designed to handle 2 bikes but the bikes are kept on the floor; you won’t be saving any space; although you will be encouraging your family to look after their bikes.
It measures 30 inches by 24 inches by 22 inches. But you should be aware that it won’t take oversized tires; such as those on most commuter bikes. The base of the Racor PBS-2R is H shaped. From there two straight bars rise off at a diagonal and meet another 2 bars from the opposite side of the H. Between them they create a slot that your tire can slide into. You can use the front tire or the rear one. Racor recommends that if you slide in one bike front first you should slide the other in rear first; this will make the most of the space you have without taking up all your storage space.
A bracing bar between the slots helps to ensure the stand is strong enough to be used over and over again. On the bottom of this bike stand you’ll find resin feet which are designed to protect your floors; even if the stand slides. Perhaps the best part of this bike stand is the fact that it takes a few moments to assemble and then you simply place it on the floor.
It is possible to drill through the stand and bolt it to the floor if safety is an issue but it’s not intended to be used like this. The stand itself weighs just 13 pounds which means you can easily take it with you to a friend’s house or even on vacation. If you wish you can even mount it into the back of your truck; allowing you to effortlessly carry your bikes anywhere with you.
You should note that although this Racor PBS-2R stand will work with most bikes there is a good chance it won’t be any use to you if you have disc brakes. Equally the rear derailleur could hit the stand when reverse parking. You’ll have to take a look at your bike to decide if this will affect you or not.
There is no doubt that this bike stand from Feedback oozes style. You could use it in your garage, workshop or in a showroom. The design is actually quite simple and will only take one bike. However, it is possible to clamp additional stands next to this one; giving you all the space you need to store your bikes. You should note that you can choose between 12, 13.5 and 15 inches between your stands; when adding more.
The joining clips do make it possible to add stands at different angles. This can make it easier to make the most of the space you have available or to create a showroom look.
The Feedback measures 13.5 inches by 16 inches. The upright post can be folded down by sliding a pin out; this will give you a height of just 3.2 inches. That means this is small enough to carry with you in a backpack. It weighs just 5.9 pounds.
The upright post is actually spring loaded, a simple push of the button will have it bouncing upwards and into position. The post runs next to the groove in the base plate. This allows a small wheel like structure to be added to the top of the post; perfectly in line with the tire groove.
This wheel like structure helps to secure the bike in position and acts as a stop; to prevent you overshooting the bike stand. You may also be grateful to learn that you can have this Feedback Sports bicycle storage stand in white, silver or black.
The stand is surprisingly stable; this is probably to do with the simple yet broad design of it. You can stand it onto concrete but it will work just as well on the carpet. Of course, this bike stand is designed to accommodate your bike in its usual position; with both wheels on the floor. It is not a space-saving solution but it will help to protect your bike from accidental drops.
It can handle bikes with road tires of 20mm up to 2.4 inches wide. Providing your mountain bike tires are between 20 and 29 inches they should fit. Your wheel is held in place via 3 points of contact; at the sides of the stand and the front stop. It’s possible to slide either your front or your back wheel into this bike stand; the effect is the same.
Perhaps one of the best features of this bike stand is that you can use it even when your hands are full. Simply roll the bike into the grooved section and you’re done. This prevents you from crashing your bike into the wall as you park and ensures you know exactly how much space it will occupy; allowing you to plan your garage round it.
While you may not want to use this as your regular bike repair stand; it is still useful for basic maintenance tasks such as inflating your tires or even lubricating your chain; all you need to do is lift the rear wheel to turn the crank.
This is a great offering from Bikehand. Not only does it look good it is also exceptionally efficient and surprisingly space saving. In fact, this bike stand has a patented design which encourages you to slide your wheel into the stand without lifting. The design works exceptionally well.
The Bikehand bike stand has a simple base with a surprisingly small profile. It measures 15 inches by 19 inches by 6 inches when folded and weighs just 8 pounds. To fold it, or unfold it all you need to do is pull one knob. Instantly the stand folds down making it easy to carry with you. There’s no excuse for ever having your bike leaning on something again!
High quality heat treated steel is used to create this bike stand. It has a powder coated black finish to ensure it looks good and will last for many years. Any child’s bike with tires between 20” and 24” should fit as well as mountain bikes with 26” to 29” tires and road bikes between 650c and 700c.
In other words, most bikes will fit. However, any bike with a tire over 2.4” wide will not fit in this bike stand. The quality of this product is so good that Bikehand is offering a lifetime warranty with it. Of course, as always this will only apply to the first owner of the stand.
The base plate consists of an oval of tubular steel mounted onto the two feet sections. Rising from the oval is a hinge system and an extending double bar; this houses your tire and stops you from overshooting the bike stand. It is this part that folds downwards.
At the rear of the stand is a deep V; measuring over four and a half inches. It is this that reach ensures your bike is stable in the bike stand. This V pivots; you ride your bike into the stand and as it passes over the V it flicks up behind the wheel; effectively locking it into place.
It is safe to say that this is one of the most stable bike stands you’ll find. Your wheel is effectively secured in three places, at the v, between the grooved raised bars, and at the hinge area. You’ll need to push extremely hard from the side to make your bike fall over; this is not something that is likely to happen in daily life by accident.
The ease in which you can slide any bike onto this stationary bike stand means it is especially useful if you have a heavy bike; such as a downhill or beach bike. The stand may not bolt to the floor but it will hold your bike securely. In addition, it has rubber feet which means you can even use it inside your house or apartment.
It’s hard to say whether the best part of this stationary bike stand is the fact that it folds to allow you to carry it with you or that the patented design ensures you can easily slide your bike in every time. Of course, if you need to, you can also use the bike to do basic maintenance tasks; it will hold it steady and upright for you.
One thing is certain if you choose the Simple Houseware 5 bike stand; you’re going to need some space for your bikes. This is not the perfect storage solution if space is tight. You’ll need to look at stationary bike stands that allow you to use the height of your room to get the bikes out of the way.
However, if space is not the issue and you have multiple bikes that need to be stored then this could be the perfect solution you’re looking for.
The Simple Houseware bike stand arrives needing to be assembled. There are five sections with a simple loop created out of twin bars; these are designed to accommodate the tires of your bikes. You’ll also find two end pieces which create a curved end to your bike stand and ensure it looks like a finished product.
The good news is that you don’t need to join all 5 stands together if you don’t wish to. You can opt to slot just 2 or more together; you can even create two stands from the pieces to make the most use of the space you have.
Creating the bike stand is actually very easy. Simply slot your chosen pieces together and the built-in clips will spring into place; locking the pieces into position. Repeat until you have all the pieces you need in place and then stand your bike stand where you want it.
It’s worth noting that the Simple Houseware bike stand is made from steel which has been powder coated. This ensures it is weather resistant; you can even use the stand outside; if you wish. Its dimensions are 70” long, 14.75 inches wide and 14 inches high. Each of the bike sections is 12 inches long. It should be feasible to park two bikes next to each other even if they are both putting their front tire into the bike stand.
The stand is designed to be used with most bikes; providing your wheel size is between 12 inches and 26 inches. It can also accommodate tires as wide as 3.5 inches; allowing you to hold road bikes, mountain bikes, and even beach cruisers.
It is worth noting that the gaps are actually a little large to support children’s bikes effectively. They are likely to lean. However, you can get over this by adding a little foam to the sides of the wheel slots; helping to clamp the bikes into position. This can also be necessary if you have a road bike with skinny tires.
Whether you’re looking for a school, a club or simply because you have a growing family; the Simple Houseware stationary bike stand is definitely the one you should be considering for practicality and ease of use.
It is worth noting that this bike stand does not come with bolt down points; you’ll have to create your own if you’re looking to secure the stand outside a property. If you adopt this approach, a good lock around your bike and a waterproof covering are all you’ll need to keep your bike outside all year round.
Moving back to maintenance and repair this bike repair stand from Yaheetech is stylish and extremely practical. It has four legs set at diagonals emitting from its base; this ensures your bike remains stable while you’re working on it.
The four legs can be pulled up and into the main post; allowing you to transport the bike stand easily. This is done by a simple twist of the knob; the same approach will allow you to open the legs out to the desired angle. The main post starts at 42.5 inches tall and can extend to 74.8 inches. Again, this is via a simple twist knob. You should be able to achieve the right height for your bike to make maintenance and repairs easy.
You can clamp any bike frame between 1 inch and 1.6 inches into this bike repair stand. The head which clamps onto your bike rotates in 360°; ensuring you can securely hold any bike on the stand and get the right angle depending on the work you wish to carry out.
As an added bonus there is a simple bar that comes from near the height adjuster and clamps onto your front handlebars; effectively holding the front wheel straight while allowing you to work on it.
In keeping with the majority of other bike repair stands this is made from heavy-duty metal and powder coated black. The powder coating will prevent the metal from rusting and ensure the stand lasts for a long time. If you do manage to damage the powder coating it is important to paint the exposed area or even have it re-powder coated. Once rust finds a way in there is little that can stop it.
The maximum weight this bike stand can take is 66 pounds; that’s 30kg which is sufficient to support most bikes. The clamp has plastic teeth to prevent it from doing any harm to your bike frame while it’s in the standard. All the moveable parts are easily adjusted via the central knobs.
However, it should be noted that the smoothness of the clamp is effective at preventing your bike from getting damaged. Unfortunately, it is also effective at preventing it from clamping firmly against any surface. In short, your bike is liable to slip forwards when using this bike repair stand. The answer is to ensure you clamp nearer the front than the back of your bike; the crank should still be able to turn freely.
Several people have reported the clamp joining the pole to the telescopic pole is plastic and has either arrived broken or breaks easily. If this does happen to you it is important to take it up with Yaheetech immediately. Their customer service seems to be good and they will do their best to help you.
It is also worth noting that the Yaheetech mechanic bike repair stand comes with a tray attached to the post. This can be slid up and down and is the perfect way of ensuring all your tools are right where you need them to be.
The name of this stand should certainly give away that it is a bike repair stand. In fact, the Park Tool bike repair stand is very simplistic but surprisingly sturdy.
A single pole rises up from a ‘V’ shaped base. There is a quick release lever that allows you to move the leg base support upwards. You can then push n the two locking pins to allow the legs to lie flush with the pole. The stand is designed to lean forward slightly with the legs stretching in front of the clamp. This design ensures the weight of the bike is borne through the stand. The result is an extremely stable stand; no matter how much effort you put into undoing the various nuts and bolts. The fact that the central yoke is reinforced simply helps to ensure the stand is both stable and strong.
When folded this stand is just 41 inches long. Opened out it is 23 inches by 23 inches by 59 inches tall. It weighs just over 19 pounds. That’s heavier than most of the others on this list but still light enough to carry with you and help out a friend; when needed.
The central pole has a second quick release lever near the top. This allows you to pull up the telescopic inner pole; extending the length of this bike repair stand from 39 inches to 57 inches. At the top of the pole is the clamp and two more quick release adjustors. One is to control the clamp. The clamp has soft plastic inserts which can be replaced. This will protect your bike from getting damaged. In addition, you can rotate the clamp a maximum of 360°; this is enough to ensure you can get the bike into just the right position for the work you want to do. The clamp opening is .94 inches to 3 inches; providing your frame is within this size guide it will fit perfectly into the clamp.
It’s important to note that this bike stand can accommodate bikes up to 100 pounds in weight without any issue.
Although designed as a bike repair stand it is possible to use this as a stationary bike stand and keep your bike on it when it’s not in use. It will prevent any issues with tires getting soft or flat spots. But, this is not the most compact offering available for storing your bike. It’s one of the best options on this list if you have space and the time to build and maintain bicycles.
There is one flaw that you should be aware of. Quite a few customers have complained regarding the inner pole not being able to slide into place as the spring button is bent or the ball won’t retract far enough. Park Tool is aware of this issue and is resolving it. In the meantime, their customer service is very efficient at getting you a replacement part. It’s just worth checking as soon as you receive the bike stand.
Feedback has another option on the best bike stand 2019 list. This is a freestanding bike repair stand finished in red to ensure it stands out in any workshop or garage.
This bike repair stand takes the traditional approach of three legs, each set at a diagonal to maximize the strength of the stand. The support bar that runs between these legs should be straight when the legs are out; effectively locking them into position. At the top of these legs is a quick release lever that allows you to slide the legs upwards; flattening the stand and making it easier to store or transport when necessary. When folded up the stand is just 37 inches long.
The central pole has a further quick release lever that allows you to extend the height of the stand. You can set it between 42 inches and 71 inches. At the top of the stand there is a simple 90° bracket, clamped onto the main pole with a knob. This can be loosened to allow you to move the bike up or down according to your needs.
Feedback has designed the bracket so that it can be turned through 360° helping you to find the right position to lock your bike onto the standard and make it easy to work on.
The clamp itself is adjustable and utilizes a torque amplifying clutch; it effectively holds your bike secure with a minimum of effort from you. This design reduces the chances of your bike becoming damaged. You only need to turn the clamp 90° for it to be closed properly.
This Feedback Sports Pro bike stand is made from anodized aluminum and can handle bikes up to 85 pounds in weight. It weighs just over 10 pounds and is 6.6 inches by 5 inches by 37 inches when folded; perfect for traveling with.
It is worth noting that once your bike is on the stand you can swing the black arm outwards horizontally; this will allow you to spin the crank and pedals with the bike on the stand. If you don’t swing the arm out the pedals will bang on the frame.
Although this bike repair stand is designed for use with bicycles several customers have commented that they have successfully used it with E-bikes. These are usually much heavier but the fact that it successfully holds their weight is a testimony to the construction standards of this stand. Part of this strength comes from the fact that the bike stand is made from anodized aluminum; which is both strong and light. The clamp opens from between 1 inch and 3 inches; ensuring that most bikes are catered for and the base of the bike stand is 54 inches; that’s enough to ensure it stays stable no matter what you throw at it.
As an added bonus the Feedback Sports pro bike stand comes with a 3-year warranty against defects; that should help to give you peace of mind when you purchase one of the best bike stands currently available.
The final entry on the best bike stand list is from Delta Cycle and is aptly named the Michelangelo. This is because it could be a bike stand, an abstract piece of art or even a coat stand. It’s is so beautifully designed that it wouldn’t look out of place in any home. It could even make your bike look better than it does!
It is important to be aware that there are two versions of this stand; one that holds 2 bikes and another that holds 4 bikes. Both are exceptionally good value for money.
Two distinctive differences between the Delta Cycle Michelangelo and the other bike stands on this list are the color and its capabilities. This bike stand can take any bike thanks to arms that are easily adjusted. In addition, the rack is finished in silver; an unusual but practical choice for inside a home.
This offering from Delta Cycle can handle 80 pounds worth of bikes; that’s 2 bikes of up to 40 pounds each. This may rule out your beach cruisers but the majority of bikes will fit comfortably into the clamps. It measures 83 inches tall, by 19.75 inches wide and a depth of 16 inches. This is big enough to keep your bike off the wall.
The Delta cycle bike stand is designed to lean against your wall. While you can secure it to the wall this is not an essential step. The twin silver bars rise straight up on both sides forming a U at the top. At the bottom, the bars come out at a diagonal into the room. This helps to transfer the weight of the bikes onto the wall and the floor; preventing the bike stand or bikes from toppling.
The addition of rubber feet and rubber grips on the rear of the stand make sure that your floors or walls are not marked and the bike stand doesn’t move on its own accord. Rubber coverings on the support arms are also a nice touch; they help to ensure your bike doesn’t get damaged while hovering in your home.
Each bike is supported with two arms; these utilize a simple wrap round system to hold them in place on the stand. This is surprisingly effective! You can easily move both the arms into your desired position; allowing you to safely store mountain bikes, road bikes, and even ladies bikes.
You may be surprised to learn that the bike stand weighs just 12.8 pounds and positions your bikes approximately one foot from the wall; this is enough to ensure no dirt is transferred from your bike to the wall. You can use the bike stand on carpet, concrete or even vinyl floors; it won’t damage them.
Although this bike stand doesn’t appear like it should work, it does! However, there have been several people with issues regarding the arms that hold your bike in position. They have been unable to get the arms not to move; even without a load.
This effectively renders the bike stand useless. If you choose to get this rack and discover the issue it is essential to speak to the Delta Cycles customer service team; they will help you resolve the issue.
How To Choose The Right Bike Stand
Knowing that you need a bike stand is a long way from choosing the right one. As you can see from the 10 that made this best bike stand list; they come in all shapes and sizes.
To ensure you get the right bike stand for your needs and one that will last you for years to come it is essential that you consider the following points before you choose a bike stand.
The right bike stand will help you to service and store your bicycle. The wrong one will simply be a pain.
What Do You Need It For?
Your first consideration must be why you need a bike stand. This may seem like an obvious question; after all, you probably want to store your bike somewhere safely.
But what else do you wish to achieve? Some bike stands are great for storage and double as a bike repair stand. Others are the right choice if you need something inside your home that has to be both functional and look good.
It’s important to decide if you’re looking to store your bike safely or if you’re going to want to work on it; you can purchase two different bike stands but choosing the right one the first time round will make this unnecessary.
The space you have available also makes a difference, most people use a bike repair stand in their garage or workshop, but if you don’t have one of these you may prefer to use a stationary bike stand and make do when it’s time to perform maintenance.
There are several factors involved in knowing which type of bike stand you really need. It’s a good idea to think about it and even talk to other before you decide which type you should be looking at.
An additional thought should be whether your bike stand is secure. This is not likely to be an issue if you’re looking for a stationary bike stand for inside your home. But, if you’re putting it in your garage or even outside you may think it’s a good idea to have one that can be bolted down and your bike locked to it. This is worth considering before you buy.
How Many Bikes Have You Got?
A simple question is how many bikes do you have that you need to store? Most bike repair stands will only accommodate one bike; if you have more than one then you’re going to need a stationary bike stand and possibly a separate bike repair stand.
Of course, there’s a big difference between having 2 bikes and 5. You need to consider where you will store your bikes and space they’ll take up; this will help you to decide if you need one bike stand for 5 bikes or 2 bike stands that can take 3 bikes each.
Don’t forget that the more space you have available the easier it is to store your bikes. But, this doesn’t mean you should opt for the biggest one possible. Consider your needs first!
There are plenty of different companies offering bike stands for sale. Before you commit to a specific bike stand it is essential that you check out their reputation. You can look at their website to see how professional it looks, how long they have been operating for and whether there are any reviews on their site or not.
Then you can look at social media sites and talk to friends; this will give you an idea regarding the customer service you can expect and the quality of the product.
Don’t forget that very few manufacturer’s keep every single one of their customers happy; there will always be those that leave negative feedback on the social sites. You simply need to verify that the majority of customers are happy.
An additional check you should perform, once you’ve identified the reputable manufacturers is to verify that the place you’re buying from is selling the genuine article. There are plenty of sites selling imitation products and you may not realize until you start complaining about the poor quality of your bike stand.
It’s highly likely that you only have a certain amount of funds to spend. Fortunately, most of the bike stands on this list are not excessively expensive.
However, you’re probably purchasing a bike stand to look after an expensive bike. That means you want to get the right bike stand; no matter how much it costs. By setting a budget you can make sure you only look at stands that you can actually afford.
The alternative is to find the stand you really want and then revise your budget until you can afford it; even if that means delaying your purchase. You’ll feel better if you purchase a bike stand without using the credit option.
You may simply need a stationary bike stand to store your bike at home and maximize the space you have available for living. However, if you’re looking for a bike repair stand and want to be able to fix your bike anywhere or even help friends out then you’ll need a stand that is easy to take with you.
The same can actually be true of stationary bike stands. You may want to take them with you when out on the trail or on vacation; if this is the case then you need to look at bike stands which are not too heavy to carry and can be folded to minimize the space they take up.
Of course if it just for hoe then it doesn’t need to be portable; you can simply bolt it to your wall.
If you are intending to take your bike and bike stand with you then, depending on the vehicle you own, it may be worth considering a bike stand that can be mounted into the back of your truck or similar vehicle.
The Racor PBS-2R is a good example of a bike stand that is designed for use at home and in the back of your truck.
Type of Clamp
It is worth taking a few moments to look at the clamps the bike stand is using. Most of the bike repair stands on this list use clamps with soft teeth that go round your frame or the post of your bike.
You need to check that the material being used is soft enough to avoid damaging your bike while tough enough to ensure your bike is held firmly in place.
As mentioned earlier it is possible to use an axle style clamp on your bike will decrease the chances of damaging your bike. However, it is generally more time consuming to get your bike into the stand.
An additional point is to look at whether the clamps rotate or not; the more flexible they are the easier you’ll find it to get your bike in the right position for storage or for you to work on.
In general a bike stand is stable. But you should verify how the stand works and whether it is free standing or needs to be secured to a wall.
If you don’t like the idea of damaging your wall then you can remove these options from your list. You also need to consider how stable a stand looks and what others have said about it. There is little point in putting your expensive bike onto the stand only to find it lying on the floor ten minutes later.
Some bike stands will give you extras. This may be in the form of a tool shelf on your bike repair stand or additional hooks to allow you to store helmets and other accessories.
This may not be important to you or it may help you to feel that you are getting more value for your money. It doesn’t matter which answer you give as long as you take a moment to think about it before you decide on the right bike stand for you.
Additional Tips For Bike Stands You Should Avoid
To make sure you get the right bike stand it is important to be aware of what you should avoid. There are several things you need to consider:
You want enough room to fit your bike tire into the stand. This means you need to purchase a stand that is big enough for the largest tire on any of your bikes.
However, you also need to be aware that a bike stand that gives you too much room for your tires will not be very good at supporting your bike. In short, it is likely to fall over. A great example of this is the wave style bike stands; you have to lean your bike against them but there is little to stop them falling over. Obviously, these are stands aimed for commercial use but the principle is the same.
It is also important to look at the price of your potential bike stand. It can be tempting to choose one simply because it is for sale at an extremely attractive price.
However, there is some truth to the saying “you get what you pay for”. A bike stand that seems too cheap may not be as good as it looks. This is not to say you can’t get a bargain but you must approach with caution.
Verify The Weight
This is an obvious but often overlooked point. Bike stands are made to accommodate a specific weight. If you try to load more than the weight limit onto the stand you are likely to bend the supporting bars.
In addition to this, you need to consider the ease in which you can lift a bike up and onto a bike stand; this is especially true for the stationary bike stands which allow you to keep 2 bikes above each other in your home.
If you’re going to struggle lifting the bike onto the stand then you’re likely to cause damage to your home, the bike or both. It’s important to consider this before you buy.
A bike stand needs to do more than just give a place for you to park your bike or do basic maintenance. It also needs to give you security; especially if you take the stand out anywhere.
Even if it is designed to sit inside your garage it is worth considering what security can be used to make it more difficult for any criminal to take your pride and joy. Breaking into your garage, house or workshop doesn’t mean someone gets free access to your stuff.
Avoid a bike stand that gives you no option to secure it; they’ll be too many times when you wish you could secure it properly.
Choosing the right bike stand doesn’t need to be hard; you simply need to be prepared to complete your research first. This will ensure you’ve considered all the relevant factors and found the most suitable for your needs.
It can be easy to grab the first bike stand that appears to fit the bill. However, doing your research will ensure the bike stand you choose has a good reputation and will last for many years to come. It is very disappointing and frustrating to choose a stand only to find it falls apart shortly after.
Every one of the bike stands on this best bike stand list has the potential to give you years of service; you simply need to decide which is most suitable for your lifestyle.